- The MW connection cannot be established.
- The status shows “DISABLED” (the Green LED is off): there is no configured connection or the cLAN is waiting for the next try.
- The status shows “Connecting…” (The Green LED blinks rapidly).
- If the LED blinks rapidly during several seconds (a minute or more) verify:
- That the equipment to which you are trying to connect is not behind a firewall which is filtering the connection. Please read the "Windows Firewall" section
- You might not have configured the MW's public IP address and/or forgot to open the TCP port in you router. Please read the "Port forwarding" section
- If the LED blinks rapidly a few seconds (2 or 3) and then blinks slowly verify:
- That the IP address and port to which the cLAN is attempting to connect are the correct ones.
- That there is no reason why the server is rejecting the connection request (ex. That is requesting identification or authentication).
- A connection is established and then it closes
- Verify that there is no reason why the server is rejecting the connection request (ex. That is requesting identification or authentication).
- The connection is established but the communication fails
- If the Green LED remains constantly on and it does not blink, is indicating that there is no data reception or transmission. If the Green LED blinks sporadically, it is indicating that data are being sent and/or received. In any case verify:
- That the established TCP connection was made to the correct IP and port
For more information on troubleshooting problems please contact support@exemys.com
2015-08-06