cLAN1520-XF / cLAN1520-MQ
Hardware features
- Ethernet port: RJ45 10/100 Mbit
- Serial ports: 2 (Both are RS232 and RS485)
- Power supply requirements: 10 to 30 Vdc
- Dimensions: 85 x 60 x 105 mm (Height x Width x Length)
- Operation Temperature: -15°C a +65ºC
Data Acquisition
- Modbus inputs/outputs (embedded Modbus master)
- Embedded Modbus slave
- Other protocols using script programming
Operating modes:
- XF model : Monitoring by WEB page / Database (Ethernet datalogger)
- MQ model : MQTT client
- Monitoring from SCADA
- Remote access to serial port
- Telemetry Controller
- Local Modbus I/O control (using the script programming feature)
- Direct connection with SCADA using its Modbus RTU and Modbus TCP slaves
Server link :
- Ethernet (Local network or using the Internet)
- Satellital (with external satellite modem, XF model only)
Wiring
Wiring – Power supply
Wiring – RS232 port – RS485 port
The RS232 port is of the 5-wire DTE type (TX, RX, RTS, CTS, GND) and has a terminal board for its connections.
The RS485 port is of the 2-wire type (TR+ and TR-) and has a terminal board for its connections.
There's no need to configure whether you are going to use the port RS232 or RS485. Just connect the wires to the corresponding terminals.
2020-09-28
